KS1507M
Power On/Off time switch module, 7 channels
This is a daily power On/Off time switch module in compact size. Allow people to set up to 7 channels in a day. Furthermore, it has cycling switch too. People can set on/off interval repeatly from 1 minutes up to 23 hours 59 minutes.
It is measured of 34 x 22 mm in width and height, and 8 mm as thickness. It is good to installed in a electrically powered device, such as electric fan, coffee maker, rice cooker, motor, to manipulate the "on" or "off " of their power source.
The module is metal framed with 16 connection pins with 2 mm pitched. Good to mount on main board. To keep the setting data properly a 3.0 volts backup battery is suggested to apply. Low voltage detection circuit is built-in the module to check the power of backup battery. When its voltage is measured less than 2.7V, a "low battery" sign is appeared in blinking to warning battery replacement.
As well as setting the daily "on" and "off" time (up to 7 channels), it is possible to set the identical interval of "on" and "off" period, called as "cycling mode".
In additional to the above two modes, regular daily time On/Off, and cycling, to set the timer as a combination of the two modes is possible too. Please refer to the attached illustration drawing to see the time chart.
It is measured of 34 x 22 mm in width and height, and 8 mm as thickness. It is good to installed in a electrically powered device, such as electric fan, coffee maker, rice cooker, motor, to manipulate the "on" or "off " of their power source.
The module is metal framed with 16 connection pins with 2 mm pitched. Good to mount on main board. To keep the setting data properly a 3.0 volts backup battery is suggested to apply. Low voltage detection circuit is built-in the module to check the power of backup battery. When its voltage is measured less than 2.7V, a "low battery" sign is appeared in blinking to warning battery replacement.
As well as setting the daily "on" and "off" time (up to 7 channels), it is possible to set the identical interval of "on" and "off" period, called as "cycling mode".
In additional to the above two modes, regular daily time On/Off, and cycling, to set the timer as a combination of the two modes is possible too. Please refer to the attached illustration drawing to see the time chart.
Specifications
- Physical Size:
- Metal Frame: 34 x 22 mm
- Thickness: 8 mm (connector not included)
- 16 pins with 2.0 mm pitch
- LCD Display
- Screen Size: 27 x 13 mm
- Number of Digit: 4 digits
- Digit Height: about 4.5 mm
- Power Source:
- Main Power – 3.6 VDC, converted from AC normally
- Back Up Power – Battery, 3.0 VDC
- Low Power Detector (built-in): Warning mark (broken battery) flashing when backup voltage below 2.70 VDC
- Output Control Signal:
- Timer ON : + 3.60 VDC
- Timer OFF : 0 VDC
- Operation Temperature: -10 ~ +50 °C
- Storage Temperature: -20 ~ +60 °C
Features
- Programmable Daily Power ON/OFF Switch, up to 7 channels
- Programmable Cycling ON/OFF switch, from 1 minute to 23 hours 59 minutes
- Combination of daily and cycling ON/OFF switches
- Available in both 12 and 24 versions
Main Products
- Digital Clock, Countdown Timer, AC On/Off Programmable Timer, and Thermometer